Monarch 318LIPW2K - User Manual

1A - General information
The Transmitter Solutions Monarch - 318LIPW2K is a key chain style
mini transmitter operating at 318 MHz. It has been designed for use
with programmable telephone entry, security, and access control
systems operating with a 318 MHz frequency receiver.
The code sent by the transmitter includes a 16 bit security code which
allows up to 65,536 code combinations and 4 bits of facility code which
allows up to 16 facility codes .
CONTENTS
1A - General information
1B - Technical specifications
1C - Main components
1 - TRANSMITTER OVERVIEW
2 - NUMBERING
3 - PROGRAMMING
4 - OPERATION
5 - BATTERY ACCESS
1B - Technical specifications
Operating frequency 318 MHz
Number of keys: 2
Battery life: 18 24 months
Number combinations :
Operating temperature: -20°F÷+131°F (-20°C
Overall dimensions: 2.4”x1.4”x0.63” (61x36x16 mm)
Weight: 1 oz. (20 gr.)
Battery : 2 x 3V lithium batteries CR2016
÷
65,536
Facility Codes : 16
÷+55°C)
The Transmitter Solutions - 318R receiver which operates with this
transmitter has a Wiegand 26 bit format output, which will operate any
type of access control system equipped to accept a 26 bit Wiegand
input. The CR 2016 lithium batteries have a shelf life of about 6 months.
Part 15 of FCC Regulations andThe product fully complies with the
European Directives 99/5/CE, 89/336/CEE, 73/23/CEE.
1C - Main components
Push-button B
Red
LED
Key
holder
ring
Battery
door
Push-button A
6 - TROUBLESHOOTING
Blue & White Case
Transmitter
Solutions
Thank you for choosing a Transmitter Solutions product .
Please read this manual carefully before using the product.
Made in Italy. Copyright Transmitter Solutions© 2006 by
Manual
MONARCH 318LIPW2K

Summary

Transmitter Overview

General Information

Key chain style mini transmitter operating at 318 MHz for access control systems.

Technical Specifications

Details operating frequency, battery, dimensions, temperature, and compliance standards.

Main Components

Identifies key parts of the transmitter like LED, buttons, and battery door.

Numbering and Programming

Numbering

Each transmitter is sold with a unique factory set sequence number and facility code.

Programming

Facility code and sequence number must be programmed into your system memory.

Operation and Battery

Operation

Depress either button until the red LED illuminates, then release.

Battery Access

Turn battery door clockwise to access and replace CR2016 lithium batteries.

Troubleshooting and Warranty

Troubleshooting

Addresses issues like no signal or LED not lighting, suggesting battery replacement or programming checks.

FCC Compliance

States compliance with Part 15 of FCC Rules and operating conditions.

Warranty Information

Provides a 24-month warranty period for transmitters against defective components.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The Monarch 318LIPW2K is a compact, key chain style mini transmitter designed for use with programmable telephone entry, security, and access control systems operating at a 318 MHz frequency. It is manufactured by Transmitter Solutions and is designed to work with their 318R receiver, which provides a Wiegand 26-bit format output compatible with any access control system accepting a 26-bit Wiegand input.

Function Description:

The primary function of the Monarch 318LIPW2K is to transmit a secure signal to a compatible receiver to activate access control or security systems. Each transmitter is factory set with a unique sequence number and facility code. When either of its two buttons (Push-button A or Push-button B) is pressed, a small red LED illuminates, indicating that a signal is being transmitted. The code transmitted includes a 16-bit security code, allowing for up to 65,536 code combinations, and a 4-bit facility code, which enables up to 16 facility codes. This robust coding scheme enhances security and system flexibility.

Important Technical Specifications:

• Operating Frequency: 318 MHz
• Number of Keys: 2
• Battery: 2 x 3V lithium batteries (CR2016)
• Battery Life: 18 – 24 months
• Number of Combinations: 65,536
• Facility Codes: 16
• Operating Temperature: -20°F to +131°F (-20°C to +55°C)
• Overall Dimensions: 2.4" x 1.4" x 0.63" (61 x 36 x 16 mm)
• Weight: 1 oz. (20 gr.)
• Compliance: Fully complies with Part 15 of FCC Regulations and European Directives 99/5/CE, 89/336/CEE, 73/23/CEE.

Usage Features:

• Simple Operation: To operate, firmly depress either Push-button A or Push-button B until the red LED illuminates, then release the button. If the desired device does not respond, the user should repeat the process or consult the troubleshooting section.
• Key Chain Design: Its mini, key chain style makes it convenient for everyday carry and easy attachment to keys.
• Two Buttons: The presence of two distinct buttons (Push-button A and Push-button B) allows for potential control of different functions or access points, depending on the system configuration.
• Wide Compatibility: Designed to integrate with programmable telephone entry, security, and access control systems that utilize a 318 MHz frequency receiver. The 26-bit Wiegand output of the compatible receiver ensures broad compatibility with various access control systems.

Maintenance Features:

• Battery Access and Replacement: Battery replacement is straightforward. To access the batteries, the battery door on the back of the transmitter needs to be turned clockwise. The device uses two CR2016 lithium batteries. When inserting new batteries, it's crucial to ensure they make contact with the internal ring and that the positive (+) side of the battery faces the back of the transmitter. After replacement, the red LED should illuminate when either button is pushed, confirming correct installation.
• Troubleshooting Guide: The manual provides a basic troubleshooting section for common issues:
  • System not receiving signal, LED not lighting: Suggests replacing the transmitter batteries.
  • System not receiving signal, LED is ON: Recommends checking if the transmitter is programmed into the system.
  • Reduced operating range: Advises replacing the transmitter batteries.
• Battery Shelf Life: The CR2016 lithium batteries have a shelf life of approximately 6 months, although the operational battery life is 18-24 months.
• Warranty: Transmitter Solutions offers a 24-month warranty on the 318 transmitters, starting from the manufacturing date. This covers defects in components, with repair or replacement at the manufacturer's discretion. The warranty does not cover damage to the transmitter case due to external conditions or battery life.
• Disposal: Users are reminded to dispose of batteries properly according to local laws and regulations.

The Monarch 318LIPW2K is a reliable and user-friendly device for secure access control and security applications, emphasizing ease of use, robust security features, and straightforward maintenance.

Monarch 318LIPW2K Specifications