Monarch PLT200 - PLT200 SPECIFICATIONS; Laser Specifications; Non-Contact Specifications

E-4
Contact Specifications (continued):
Accuracy: Revs: ±0.05% of reading (RPM) or resolution limit
(with no slippage)
Linear: ±0.5% of reading or resolution limit (with no
slippage)
Contact Measurements Ranges:
TACHOMETER:
Revolutions per Minute (RPM) 0.5 to 20,000 RPM
Revolutions per Second (RPS) 0.0833 to 333.33 RPS
Revolution per Hour (RPH) 30 to 999,990 RPH
RATES: Wheel Circumference:
Inches per Second 10 cm: 0.033 to 1312.3 IPS
12 in: 0.100 to 2,400.0 IPS
Inches per Minute 10 cm: 1.969 to 78,740 IPM
12 in: 6.000 to 144,000 IPM
Inches per Hour 10 cm: 118.11 to 999,990 IPH
12 in: 360.00 to 999,990 IPH
Feet per Second 10 cm: 0.003 to 109.36 FT/S
12 in: 0.009 to 200.00 FT/S
Feet per Minute 10 cm: 0.164 to 6,561.7 FT/M
12 in: 0.500 to 12,000 FT/M
Feet per Hour 10 cm: 9.843 to 393,700 FT/H
12 in: 30.000 to 720,000 FT/H
Yards per Second 10 cm: 0.001 to 36.453 YPS
12 in: 0.003 to 66.667 YPS
Yards per Minute 10 cm: 0.055 to 2,187.2 YPM
12 in: 0.167 to 4,000.0 YPM
S-19
Arreglo Para Modo TOTALizer (continuación):
NONE (Ninguno), 1,
2 o 3
O
Repita hasta el
número de
posiciones
decimales se
despliega
La unidad guardará estos parametros para uso futuro (incluyendo Fijar
modo continuo, Lock on/off) aún si se apaga y se vuelve a prender.
DONE (Terminado),
luego unidades
seleccionadas
DONE (Terminado),
USE CONTACT TIP (use punto de
contacto) o [rueda seleccionada],
luego unidades seleccionadas
Unidades= COUNT: Unidades Rotacionales/Lineares:
9. Entre selección
del número de
posiciones
decimales
10. Seleccione
posiciones
decimales
11. Guardar y
avanzar
12. Salir de modo
Setup –
Listo para
medir
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com