This document provides assembly instructions and product information for the MondawE 12x20ft Cedar Framed Galvanized Steel Double Roof Gazebo.
Function Description
This gazebo is designed to provide a shaded outdoor living space. It features a cedar-framed structure with a galvanized steel double roof, offering durability and protection from the elements. The double roof design likely enhances airflow and stability.
Important Technical Specifications
The gazebo dimensions are 12x20ft. The construction involves cedar framing and galvanized steel for the double roof.
The assembly requires four or more people, indicating a substantial size and weight for the components.
Tools required for assembly, but not included, are:
- Drill
- Hammer
- Tape measure
- Screwdriver
- Stepladder
The gazebo comes in 8 carton boxes, suggesting a modular design for easier transport and assembly.
Hardware List (Carton Box -7) includes:
- N1 Hook: 2PCS
- R1 Press panel: 70PCS
- F5 Small post plate: 2PCS
- AA M10x215 Outer Hex head bolt & Washer: 12PCS
- BB M5x25 Self-tapping screw & Washer: 72+7PCS
- CC M10x100 Self-tapping screw & Washer: 8PCS
- DD M8x40 Self-tapping screw & Washer: 48+4PCS
- EE M5x40 Self-tapping screw & Washer: 36+3PCS
- FF M8x30 Inner Hex head screw & Washer: 28+2PCS
- GG M6 Nut & Washer: 20+2PCS
- HH M6x15 Inner Hex head screw & Washer: 120+12PCS
- II M6x15 Outer Hex head bolt & Washer: 16+2PCS
- JJ M5x50 Self-tapping screw: 96+9PCS
- KK M6x55 Inner Hex head screw & Nut: 16+2PCS
- LL M6x75 Inner Hex head screw & Nut: 4+1PCS
- MM M10 Nut: 12+1PCS
- NN M6x45 Inner Hex head screw & Nut: 4+1PCS
- PP M8 Nut: 28+3PCS
- TT M6x15 Inner Hex head screw & Washer: 172+17PCS
- UU Φ6x200 Stake: 24PCS
- VV M3 Drill: 2PCS
- Z1 M6 Wrench: 2PCS
- Z2 M6 Screwdriver set head: 1PCS
- Z3 M10 Wrench: 2PCS
- Z4 M8 Allen key: 2PCS
- Z5 M6 Allen key: 2PCS
- Z6 M6 Allen key: 1PCS
Parts List (Carton Box -1) includes:
- 12 Middle post: 2PCS
- 02 Long side outer middle beam: 2PCS
Parts List (Carton Box -2) includes:
- 11 Corner post: 2PCS
- 01 Long side outer beam: 2PCS
Parts List (Carton Box -3) includes:
- 11 Corner post: 2PCS
- 01 Long side outer beam: 2PCS
Parts List (Carton Box -4) includes:
- 03 Short side outer left beam: 2PCS
- 04 Short side outer right beam: 2PCS
- 05 Long side inner beam: 4PCS
- 06 Long side inner middle beam 1: 2PCS
- 07 Long side inner middle beam 2: 2PCS
- 08 Short side inner beam: 4PCS
- 10 Short side inner middle beam: 2PCS
- 13 Left support: 6PCS
- 14 Right support: 6PCS
Parts List (Carton Box -5) includes:
- T3 Big roof left cover plate: 4PCS
- T4 Big roof middle cover plate: 14PCS
- T5 Big roof right cover plate: 4PCS
Parts List (Carton Box -6) includes:
- T1 Left small cover plate: 8PCS
- T2 Big roof left cover plate: 4PCS
- T6 Big roof right cover plate: 4PCS
- T7 Right small cover plate: 8PCS
- T8 Small roof middle cover plate: 2PCS
- T9 Small roof left cover plate: 2PCS
- T10 Small roof middle cover plate: 8PCS
- T11 Small roof right cover plate: 2PCS
Parts List (Carton Box -7) includes:
- S1 Small roof cover: 2PCS
- I2 Big roof long side right tube: 2PCS
- G1 Big roof long slant beam: 4PCS
- P1 Big roof inner bracket: 2PCS
- F9 Corner cover: 4PCS
- M1 Small roof inner bracket: 1PCS
- S2 Big roof long slant beam cover: 4PCS
- H1 Big roof top beam: 12PCS
- 09 Base cover: 6PCS
- B6 Base: 6PCS
- G5 Slant beam bottom connector: 4PCS
- H3 Small roof top beam: 4PCS
- I1 Big roof long side left tube: 2PCS
- L1 Small roof slant beam: 4PCS
Parts List (Carton Box -8) includes:
- E1 Short side curtain bar: 4PCS
- I3 Big roof short side tube: 2PCS
- K10 Long side middle blocking bar: 4PCS
- Q2 Small roof short side blocking bar: 2PCS
- J1 Small roof long connector: 2PCS
- F3 Small roof long side left blocking bar: 2PCS
- F4 Small roof long side right blocking bar: 2PCS
- J2 Small roof side connector: 2PCS
- F8 Middle cover: 6PCS
- E3 Long side curtain bar: 8PCS
- K5 Long side middle across bar: 4PCS
- K2 Short side middle across bar: 4PCS
- K4 Big roof lower across bar: 8PCS
- K1 Long side across bar: 8PCS
- K3 Big roof upper across bar: 8PCS
- H2 Bottom connector for small roof top beam: 4PCS
- 01 Big roof middle tube: 3PCS
- K7 Big roof blocking bar 1: 4PCS
- K8 Big roof blocking bar 2: 4PCS
- K9 Big roof long side blocking bar: 4PCS
- S3 Small roof slant cover 1: 2PCS
- S4 Small roof slant cover 2: 2PCS
- K6 Short side middle blocking bar: 2PCS
Usage Features
The assembly instructions emphasize several key usage features:
- Team Assembly: Requires four or more people, highlighting the size and complexity of the structure.
- Protective Gear: Wearing protective gloves is recommended during assembly.
- Pre-tightening Screws: Users are advised not to fully tighten screws until the assembly is complete, allowing for adjustments and proper alignment.
- Safe Assembly Environment: Instructions recommend assembling the product near its final placement to avoid unnecessary movement. It should always be placed on a flat, steady, and stable surface.
- Child Safety: All small parts and packaging materials should be kept away from babies and children due to potential choking hazards.
- Alignment Check: Before connecting beams, ensure all inner holes align with outer holes.
- Square and Level Installation: Ensure the distances between two diagonals of posts are equal using a tape measure. Keep beams at right angles to posts, posts at right angles to the ground, and beams horizontal.
- Interlocking Panels: Cover plates are designed to interlock, ensuring a secure and weather-resistant roof.
- Staking for Stability: The base of the posts should be fixed to the ground using stakes (UU), indicating a need for ground anchoring for stability.
Maintenance Features
The manual provides comprehensive care and maintenance guidelines to ensure the longevity of the gazebo:
- Rust Prevention: Steel components are treated with rust-inhibiting paint. However, surface oxidation (rusting) can occur if the protective coating is scratched. This is not considered a defect and is not covered by warranty.
- Minimizing Scratches: Care should be taken during assembly and handling to prevent scratching the paint.
- Immediate Touch-up: Any scratches or damage should be immediately touched up with rust-inhibiting paint.
- Rust Removal: Surface rust can be easily removed with a light application of common cooking oil.
- Preventing Stains: If surface oxidation occurs and is not addressed, it may drip onto decks or patios, causing difficult-to-remove stains. Regular maintenance helps prevent this.
- Cleaning: Stains should be wiped off as quickly as possible with a damp cloth. If necessary, wash with a mild solution of soap and water, rinse thoroughly, and dry completely.
- Regular Bolt Checks: Periodically check and ensure that all bolts are well-tightened during use to maintain structural integrity.
Need help?
General
To Next Page