EasyManua.ls Logo

MONDELIN LEVPANO I - User Manual

MONDELIN LEVPANO I
32 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
www.levpano.com
LEVPANO
®
I
REF 513000
LEVPANO
®
II
REF 514000
VIDEO
MOB - MONDELIN SAS ZI Le Maroquin F – 42820 AMBIERLE
NOTICE N° M 00736 révision du 20/11/2019 – Notice originale
FR NOTICE D’INSTRUCTIONS ET DE MAINTENANCE page 1
EN INSTRUCTIONS AND MAINTENANCE MANUAL page 4
DE BEDIENUNGS-UND WARTUNGSANLEITUNG Seite 7
NL GEBRUIKS-EN ONDERHOUDSAANWIJZING Bladesijde 10
IT AVVERTENZE, ED ISTRUZIONI, PER LA MANUTENZIONE Pagina 13
ES MANUAL DE INSTRUCCIONES Y MANTENIMIENTO Página 16
RO INSTRUCȚIUNI ȘI ÎNTREȚINERE Pagina 19
HU HASZNÁLATI ÉS KARBANTARTÁSI ÚTMUTATÓ Oldal 22

Table of Contents

Questions and Answers

  • J
    Jennifer CochranAug 11, 2025
    What to do if MONDELIN Lifting Systems comes down freely without brake?
    • D
      David Banks Jr.Aug 11, 2025
      If your MONDELIN Lifting Systems comes down freely without the brake engaging, several factors could be at play. It might be due to excess winch grease. In this case, degrease the lock washer and the support. Another potential cause is the tightening of the brake. To resolve this, put the crank handle and the lock washer in contact. Finally, the lock washer itself might be inoperative, so check its condition.
  • K
    Kristen Abbott MDAug 19, 2025
    Why is my MONDELIN Lifting Systems device locked in the raised position?
    • K
      krauseseanAug 19, 2025
      If your MONDELIN Lifting Systems device is stuck in the raised position, there are a few possible reasons. First, the brake might be locked. Try undoing the crank handle and putting it back in contact. Second, the cables could be stuck or damaged; check their passage and condition. Finally, the columns might be locked due to dirt or debris; ensure the cleanness of the columns.
  • T
    Taylor PerkinsAug 26, 2025
    What to do if the MONDELIN LEVPANO I Lifting Systems device does not lock in one of its adjustment positions?
    • S
      Sheri GilmoreAug 26, 2025
      If the MONDELIN Lifting Systems device fails to lock in one of its adjustment positions, it could be due to a blocked lock. Try cleaning the locks. Alternatively, the beam's pivoting discs might be blocked. In this case, loosen the pivoting discs, grease the sides in contact, and then tighten the discs back, ensuring correct operating play.
  • D
    Daniel BryanSep 3, 2025
    How to fix MONDELIN LEVPANO I Lifting Systems that goes up with difficulty?
    • Z
      zgreeneSep 3, 2025
      If your MONDELIN Lifting Systems is going up with difficulty, it might be due to the presence of foreign matter. Try cleaning the device.

MONDELIN LEVPANO I Specifications

General IconGeneral
BrandMONDELIN
ModelLEVPANO I
CategoryLifting Systems
LanguageEnglish