Do you have a question about the Mondial Designs Limited Aragon AURUM and is the answer not in the manual?
Brand | Mondial Designs Limited |
---|---|
Model | Aragon AURUM |
Category | Amplifier |
Language | English |
Connect audio sources to the appropriate rear panel input jacks.
Connect tape recorder inputs to the preamp's corresponding tape outputs.
Connect power amp inputs to the RCA preamp outputs.
Connect amplifier balanced inputs to the 3-pin XLR outputs.
Connect the outboard power supply to the rear panel via the 4-pin XLR jack.
Controls power and output muting; LED indicates status.
Selects the audio source for listening; sequence is AUX, TAPE 1, TAPE 2, etc.
Selects the source for recording; sequence is AUX, TAPE 1, TAPE 2, etc.
Adjusts audio output level; lower before source change.
Adjusts left/right speaker volume balance from center detent.
20-20kHz +0.0, -0.1 dB.
100dB A Weighted.
16 Volts RMS.
10K ohms.
10 ohms Unbalanced, 20 ohms Balanced.
2 Unbalanced RCA, 1 Balanced XLR.
Do not remove cover; refer servicing to qualified personnel to prevent shock.
Do not expose appliance to rain or moisture to prevent fire or shock hazard.