EasyManua.ls Logo

Mondial Designs Limited Aragon 8008ST User Manual

Mondial Designs Limited Aragon 8008ST
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Congratulations on your acquisition of the Aragon 8008ST Dual Mono Amplifier. The
8008ST is a state-of-the-art component. Years of dedicated research, extensive testing, and
engineering refinement went into this Aragon exclusive.
Aragon components offer unparalleled flexibility and performance to the discriminating
music lover. Your 8008ST incorporates many advanced design and construction features into a
superbly crafted amplifier.
We recommend playing your 8008ST a minimum of 24 hours before performing any
critical listening. We do understand that most of you will not wait that long. Therefore, please
note that your 8008ST will improve sonicly over the course of the first week if the amplifier is left
on. During this time, you will notice the sound from your 8008ST will become richer, warmer
and more open. After this first week of break-in the high current bias of the 8008ST will allow the
amplifier to reach it's proper operating temperature within 20 minutes from turn on. From this
point forward we strongly recommend that you turn the amplifier OFF when not listening to
music.
UNPACKING YOUR NEW 800851 Dual Mono Amplifier
Your new 8008ST Dual Mono Amplifier was diligently hand-crafted. thoroughly tested
and carefully packed at our factory in California, USA. In the unlikely event that your 8008ST is
damaged during shipment, be sure to save the carton as evidence for the freight carriers'
inspection and call your authorized dealer immediately. We strongly recommend that you
always save the box and packing materials should you have to transport your 8008ST for any
reason. This is a particularly good idea if you wish to take full advantage of any future
upgrades or options.
CAUTION:
Never ship your 8008ST Dual Mono Amplifier without the original packing.
CONTENTS OF THIS CARTON:
This carton contains: your new 8008ST Dual Mono Amplifier. a UL approved power cord.
a Warranty Registration/Survey card. and of course. this Owner's Manual. Please follow the
instructions contained in this manual in order to derive the maximum performance. flexibility
and enjoyment from your 8008ST Dual Mono Amplifier.
Be sure to complete and return your factory registration card immediately.
to our extended warranty as outlined on the warranty card.
This will entitle you
~ Mondial Designs LTD. 1995
Question and Answer IconNeed help?

Do you have a question about the Mondial Designs Limited Aragon 8008ST and is the answer not in the manual?

Mondial Designs Limited Aragon 8008ST Specifications

General IconGeneral
BrandMondial Designs Limited
ModelAragon 8008ST
CategoryAmplifier
LanguageEnglish

Summary

Unpacking Your Aragon 8008ST Dual Mono Amplifier

Controls and Functions

POWER ON/OFF

Rocker switch to turn the amplifier AC power ON (press top) or OFF (press bottom).

POWER INDICATOR

Light indicates when the amplifier is in the ON position.

OPTIONAL RIGHT BALANCED INPUT

Input for the right channel using an XLR balanced source.

RIGHT SINGLE ENDED INPUT

Input for the right channel using an RCA single-ended source.

RIGHT SPEAKER OUTPUT "+"

Positive (+) output terminals for the right channel speaker.

RIGHT SPEAKER OUTPUT "-"

Negative (-) output terminals for the right channel speaker.

OPTIONAL LEFT BALANCED INPUT

Input for the left channel using an XLR balanced source.

LEFT SINGLE ENDED INPUT

Input for the left channel using an RCA single-ended source.

LEFT SPEAKER OUTPUT "+"

Positive (+) output terminals for the left channel speaker.

LEFT SPEAKER OUTPUT "-"

Negative (-) output terminals for the left channel speaker.

A/C POWER CONNECTOR

3-prong connector for the AC power input.

LINE FUSE HOLDER

AC fuse protection holder. Use 12 amp slo-blow fuse.

System Setup

INPUT CONNECTION

Connect variable output source to left and right channel inputs using RCA cables.

OUTPUT CONNECTION

Connect amplifier outputs to loudspeakers, ensuring correct polarity (+ to +).

POWER CONNECTION

Plug the AC power cord into the amplifier and then into an AC wall outlet.

Specifications

Troubleshooting: No Sound

Related product manuals