Do you have a question about the Mondial Designs Limited SMX 125E and is the answer not in the manual?
Fuel System | Carburetor |
---|---|
Front Brake | Disc |
Rear Brake | Drum |
Fuel Capacity | 12 Liters |
Cooling | Air Cooled |
Transmission | 5-Speed Manual |
Front Suspension | Telescopic Forks |
Displacement | 124 cc |
Starting System | Electric and kick start |
Rear Suspension | Dual shock absorbers |
Introduction to the manual and vehicle care guidelines.
Safety precautions regarding carbon monoxide from exhaust fumes.
Safety warnings and precautions related to flammable fuel.
Information on coolant properties, flammability, and toxicity.
Safety warnings about battery electrolyte and explosive gases.
Guidance on reporting defects and contacting dealers for complex operations.
Identifies key components on the left and right views of the motorcycle.
Overview of controls and instruments on the motorcycle’s dashboard.
Location and function of ignition switch and steering lock for security.
Step-by-step instructions for removing the fuel tank, including safety.
Importance of recording chassis and engine numbers for spare parts.
Pre-ride checks for fuel, engine oil, coolant, and brakes.
Guidelines for the first 1000 km to ensure vehicle durability.
Step-by-step guide to starting the motorcycle engine safely.
Instructions on how to start moving and ride the motorcycle.
Procedure for stopping the engine and parking the motorcycle safely.
How to check and add engine oil to the correct level.
Information on tire types, pressure checks, and wear.
Inspection, cleaning, and replacement of the spark plug.
How to clean the air filter element properly.
How to check brake fluid levels for front and rear brakes.
General information and precautions regarding the motorcycle battery.
How to check and replace fuses in the electrical system.
Checking and maintaining front and rear brake systems.
General cleaning procedures for the motorcycle.
How to check and adjust the drive chain slack.
Specifications for overall length, width, height, wheelbase, and ground clearance.
Technical details of the engine type, displacement, and bore/stroke.
Specifications for fuel, oil, coolant, and gearbox details.
Details on brake types and wheel rim specifications.
Tire sizes, pressures, and ignition system type.
Specifications for vehicle light bulbs and supplied tools.
Comprehensive table detailing maintenance tasks and intervals.
List of recommended oils, fluids, and greases for maintenance.