Mongoose M60S - EMERGENCY OVERRIDE; EMERGENCY OVERRIDE - 4 DIGIT PIN CODED

EMERGENCY OVERRIDE
–
4 DIGIT PIN CODED
The system can be disarmed by entering your the unique 4 digit PIN
code shown on the
‘
PIN Code Card
’
issued w
ith this product.
KEEP THE CARD IN A SAFE PLACE
–
NOT IN THE VEHICLE !
Following is an example using PIN code
4525
The code is entered by turning the ignition ON or OFF in sequence with the dash mounted LED.
1)
Ignition ON
-
LED will light permanentl
y to commence override
.
2)
Ignition OFF
-
LED will start flashing. Count the number of flashes for the first number.
3)
Ignition ON
-
after
4
flashes (1
st
number of the example)
. The LED will light.
4)
Ignition OFF
-
count the number of flashes
.
5)
Ignition ON
-
after
5
flashes (2
nd
number).The LED will light.
6)
Ignition OFF
-
count the number of flashes
.
7)
Ignition ON
-
after
2
flashes
(3
rd
number).
The LED will light.
8)
Ignition OFF
-
count the number of flashes
.
9)
I
gnition ON
-
after
5
flashes
(4
th
numbe
r).
10)
The system will now disarm and the vehicle can be started
.
Note: If your PIN code contains a
“
0
”
, this equals
‘
10
’
.
Should you miss the LED flashes or enter a digit incorrectly, wait for 11 flashes and simply repeat
the procedure from step 1).
This system will always automatically immobilise the engine every time the ignition is turned off. This
override sequence will have to be used to start the engine if your remote controls are not available
or inoperative.
15
MONGOOSE
EMERGENCY
4 DIGIT PIN CODE OVERRIDE
PLEASE KEEP THIS CARD IN A SAFE PLACE
BUT BE READILY AVAILABLE SHOULD YOU
NEED TO USE THE OVERRIDE PROCEDURE
DO NOT LOSE THIS CARD
PIN CODE: