Need help?Do you have a question about the Monit Rally G-100 and is the answer not in the manual?
General| Brand | Monit Rally |
|---|---|
| Model | G-100 |
| Category | GPS |
| Language | English |
Check all included items, necessary tools, and find a suitable workspace before commencing installation.
Securely mount the rally computer to the vehicle's interior, ensuring it remains fixed and does not impede safety equipment.
Connect the G-100/200 unit to the vehicle's electrical system using the provided color-coded wiring loom.
Verify all electrical connections are correct and properly insulated to prevent shorts before applying power.
Configure the unit for GPS operation, including language selection and obtaining a satellite signal lock.
Set up the unit to use a traditional wheel sensor, disabling GPS and performing sensor calibration.
Calibrate the wheel speed sensor by driving a known distance, following on-screen instructions for accuracy.
Calibrate the G-200's fuel measurement system to suit your vehicle's tank size and shape.
The primary screen for viewing distance, speed, timing, and fuel data, with customizable parameters.
Set specific starting values for the Interval or Total distance counters using the device interface.
Adjust measurement units, backlight brightness, and manage automatic device power on/off.
Select and configure displayed parameters on the telemetry screen to reduce clutter and improve usability.
Measure vehicle acceleration times, such as 0-100kph or 0-400m, for performance analysis.
Configure external switches connected to auxiliary ports to perform specific functions like clearing data.
Record stage time, distance, and speed values using an external switch for detailed event analysis.
Set a programmable speed threshold to trigger a warning light when exceeded, useful for speed-controlled events.
Manually adjust the wheel speed sensor calibration value, beneficial for shared devices or tyre size changes.
Configure distance counting direction, display resolution, and manage the automatic sleep timer.
Reset all device settings to their original factory values, which will also clear custom calibration data.
Explains common error messages encountered during operation and calibration, offering solutions to resolve them.
To Next Page
