Monitex BlueLex LD-105 - User Manual

12 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Table of Contents

Questions and Answers

C
Claire TurnerJul 31, 2025
What to do if the Monitex Dental equipment handpiece is not charging?
- C
  Charles MillerJul 31, 2025
  If the Monitex Dental equipment handpiece isn't charging, there might be a few reasons. First, check the connection between the charger and the power adapter to ensure it's secure. Also, verify that the handpiece is correctly inserted into the charger by checking the cover page picture for the correct charging position. If the connections and position are correct, the charger may be defective, requiring a return to the dealer or manufacturer for repair.

Summary

Preface

Disclaimer

Safety Precautions

Device Symbols

Explains device and manual symbols.

Sterilization Procedure

Recommended sterilization process for the fiber-optic tip.

Product Cleaning

Instructions for cleaning the device's exterior surfaces.

Parts & Functions

LED Handpiece Components

Details parts and labels of the LED curing handpiece.

Charger Components

Identifies components of the charging stand and adapter.

General Installation

Mode of Operation

Panel Operations

How to operate the control panel and use the TIME button.

Panel Indicators

Meaning of panel indicators like Low Battery (bL) and Over Heat (HH).

Start;Stop Function

How to start and stop the curing cycle using the button.

Cooling System

Charger Signals

Li-Ion Battery Precautions

Important safety guidelines for handling the Li-Ion battery.

Troubleshooting

Transport and Storage Conditions

Required environmental conditions for transport and storage.

Device Specifications

Maintenance Check-List

Monitex BlueLex LD-105 Specifications

General

Brand	Monitex
Model	BlueLex LD-105
Category	Dental equipment
Language	English