Monitor POS GTA-A8 TC-Touch User Manual

GTATouch screen EPOS system
operating, installation &
maintenance manual v 1.1
Thank you for choosing Monitor touch screen products, this manual is for GTA-
A8 TC-Touch. Before installing and using the product, please read this manual.
Keep this manual for future use.
This manual contains the latest information as of supply date. We reserve the
right to update or improve the product without notification.
This equipment must be installed by qualified service personnel or distributor.
The company assumes no responsibility for unauthorised changes to the
equipment.
Monitor POS Ltd
8 Church Street, Godalming, Surrey, GU7 1EH
email info@monitorpos.co.uk
www.monitorpos.co.uk
- 1 -

Monitor POS GTA-A8 TC-Touch Specifications

General

Brand	Monitor POS
Model	GTA-A8 TC-Touch
Category	Touch terminals
Language	English

Summary

Safety Precautions

Initial Installation Procedures

Unpacking the POS System

Inspect the machine upon arrival and report any damage to the supplier.

Preparing for Installation

Ensure the housing is clean and undamaged, check work environment.

Removing the Port Cover

Undo thumbscrews and lift the bottom edge of the rear panel first.

Removing the Cable Tidy Trim

Lever off the plastic trim panel, noting differences in fastening mechanisms.

Connecting Cables to POS Ports

Fit cables into port area, tilting screen for clearance with bulky connectors.

Refitting the Coms Cover

Insert the top edge of the cover, push it into place, and refasten thumbscrews.

Customer Display Installation

Fitting the 2 Line x 20 Character Display

Install the customer display, observing software settings and mounting points.

TFT Screen Installation

Fitting the 10.1 Inch TFT Screen

Install the 10.1" TFT screen for information display, covering mechanical setup.

Second Screen Software Configuration

Configure the second display via graphics options for extended desktop mode.

System Specifications

Pre-Use Preparation Steps

POS System Layout Overview

Product Specification Details

LCD Technology Specifications

Details LCD parameters: size, viewing area, resolution, refresh rate, colour, response time.

Touch Screen Technology Specs

Lists touch screen parameters: type, interface, power, temperature, humidity, tolerances.

Comprehensive Technical Parameters

Covers POS color, touch panel, LCD, HDD, interfaces, power, chipset, LAN, CPU, RAM.

Main Board Connector Identification

Visual guide to main board connectors for the J1900N model.

Touch Panel Calibration Guide

Touchkit Controller Settings

Configure touch settings, beep, and edge compensation using the Touchkit controller.

Calibration and Linearization Tools

Utilize calibration, linearization, and draw test options for touch accuracy.

Touchscreen Linearization Process

Execute linearization by touching marked points until the indicator stops blinking.

Touchscreen Troubleshooting FAQ

Warranty and Non-Warranty Terms

Standard Product Warranty

Outlines the 24-month return to base parts and labour warranty for products.

Exclusions from Warranty

Details conditions that void the warranty, such as misuse or unauthorized repairs.