Do you have a question about the Monitor Radius 380 and is the answer not in the manual?
Details the safe steps for removing the subwoofer from its packaging.
Recommended initial settings for volume, frequency, bass, phase, mode, and trigger.
Explains the RCA stereo inputs for connecting to a stereo amplifier.
Details the LFE input for connecting to an AV amplifier or receiver.
Describes the 12V trigger input for external power control from AV equipment.
Explains setting the subwoofer's upper frequency limit via the crossover control.
Details how to adjust the volume for a balanced overall sound.
Explains the Bass EQ switch settings for tailoring bass response.
Describes the phase control for synchronizing delays between speakers.
Explains the power mode switch for automatic standby and operation.
Details the mains power switch for turning the subwoofer on/off.
Explains the IEC mains input socket and fuse holder location.
Guides on diagnosing problems when the subwoofer will not power on.
Guides on diagnosing problems when the subwoofer outputs no sound.