EasyManuals Logo

Mono Bx Series Quick Start Guide

Mono Bx Series
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
Eco Convection Ovens | 4/5/7/10-Tray | Steam Quick Start Guide
10
MONO FG1BX-UK-QSG-0100 | Rev. B23 (July 2023)
Safety
Only fully trained and authorised persons are permitted to work on the oven. Qualified electricians must carry out
all repairs and maintenance. Always disconnect or isolate the power supply before starting maintenance or
cleaning work on the oven.
A responsible Bakery Manager or Supervisor must carry out daily safety checks. Bakery staff must not, under
any circumstances, remove covers or panels to access any part of the oven.
DANGER
Never use the USB port to power or recharge electronic devices, e.g. mobile
phones. Incorrect usage causes damage to the oven and could result in a fire.
WARNING Before using the oven:
Check that all covers, panels, cables, and pipe fittings are secure.
Visually examine the oven for apparent damage or signs of tampering.
If the oven is damaged or malfunctioning, or missing parts:
Stop using it.
Do not attempt any repairs.
Contact MONO Equipment for technical assistance.
Never operate the oven with any covers or panels removed.
All utility connections to the oven must comply with the statuary requirements of
the country where the oven is installed.
Ensure this product manual is read thoroughly before operating the oven. Operate
and maintain the oven only as described in this product manual.
WARNING An electrical socket must be protected by a 30mA-rated Type ‘A’ Residual Current
Device (RCD) before installation and commissioning of the oven.
Always fit a wall-mountable isolator switch to isolate the oven entirely from the
electrical supply in an emergency. The isolator must be visible, labelled as an
emergency shutdown device, and easily accessible.
Check that the electrical requirements on the oven’s information plate match the
supply before connecting the power cable and turning the power on for the first time.
Before installation, it is recommended that a qualified and competent electrician
first tests the electrical outlet (power socket) for electrical safety.
Always ensure your hands are dry before touching any electrical components,
including cables, switches, and plugs.

Other manuals for Mono Bx Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mono Bx Series and is the answer not in the manual?

Mono Bx Series Specifications

General IconGeneral
BrandMono
ModelBx Series
CategoryOven
LanguageEnglish

Related product manuals