Mono FG150 Quick Start Guide

Quick Start Guide Eco Convection Ovens | 4/5/7/10-Tray | Steam
FG1BX-UK-QSG-0100 | Rev. B23 (July 2023) MONO
9
Electrical specifications
Power supply
WARNING  An electrical socket must be protected by a 30mA Type ‘A’ Residual Current Device
(RCD) before installation and commissioning of the oven.
 Always fit a wall-mountable isolator switch to isolate the oven entirely from the
electrical supply in an emergency. The isolator must be visible, labelled as an
emergency shutdown device, and easily accessible.
 Check that the electrical requirements on the oven’s information plate match the
supply before connecting the power cable and turning the power on for the first time.
Table 2: Oven supply specifications
Oven
Electrical supply
Fused at
Total Power (kW)
4/5-Tray
18” x 26”
240 Vac (50 Hz), 1-phase 40 Amps 7.5
26” x 18”
18” x 30”
40cm x 60cm
60cm x 40cm
40cm x 80cm
18” x 26”
380 Vac (50 Hz), 3-phase + neutral + earth (Contact factory) (Contact factory)
26” x 18”
18” x 30”
40cm x 60cm
60cm x 40cm
40cm x 80cm
18” x 26” 415 Vac (50 Hz), 3-phase + neutral + earth 11 Amps per phase 7.5
26” x 18”
40cm x 60cm
60cm x 40cm
40cm x 80cm
18” x 30” 414 Vac (50 Hz), 3-phase + neutral + earth 12 Amps per phase 8.5
7-Tray 40cm x 60cm
240 Vac (50 Hz), 1-phase 45 Amps 10
380 Vac (50 Hz), 3-phase + neutral + earth (Contact factory) (Contact factory)
415 Vac (50 Hz), 3-phase + neutral + earth 14 Amps per phase 10
10-Tray
18” x 26”
380 Vac (50 Hz), 3-phase + neutral + earth (Contact factory) (Contact factory)
18” x 30”
40cm x 60cm
40cm x 80cm
18” x 26”
415 Vac (50 Hz), 3-phase + neutral + earth 32 Amps 17
18” x 30”
40cm x 60cm
40cm x 80cm

Mono FG150 Specifications

General

Brand	Mono
Model	FG150
Category	Oven
Language	English