Monogram Systems
COMPONENT MAINTENANCE MANUAL
BASIC PN 15900
38-31-09
Page 708
May 17/02
(3) Storage Instructions
When the motor-pump-filter assembly is to be stored after overhaul, it should be
placed in the original shipping container. If the original container is not
available, wrap the assembly with barrier material (refer to Table 701) and place
in suitable container. The part number, serial number and date of overhaul shall
be clearly marked on the outside of the carton.
NOTE: Equivalent substitutes may be used for items listed.
Table 701
STORAGE MATERIALS
ITEM IDENTIFICATION SOURCE
Barrier Material Military Specification MIL-
B-121
Any government
approved source
To Next Page
Loading...