monolith OL 289 - Description of machine components; ON;OFF flip switch; HOT;COLD flip switch; Film infeed slot

1. Description of machine components
2. Technical specications
Preheating time 80 micron / 125 micron approx. 3-4 min.
Operating speed 300 mm/min.
Laminating temperature approx. 115°C
Maximum lm width DIN A4
Film thickness 80 - 125 mic (200 mic cold lamination lm)
Weight 0.83 kg
Dismensions (B x T x H) 330 mm x 190 mm x 57 mm
Input Voltage AC 220 - 240 V / 50 Hz
Power consumption in the
rst minute / during operation 600 Watt / 60 Watt
1
ON/OFF ip switch
2
HOT/COLD ip switch
3
Power light, red
4
Standby indicator, green
5
Film infeed slot
6
Film output slot
7
ABS (anti-blockage system)
8
Pouch holder
3
7