Monoprice HRM-2214F - User Manual

MDIVII
(HRM-2214F)
(HRM-2218F)
USER MANUAL
HRM-2214F / HRM-2218F
V1.0
Package Contents
■ 1 MONOPRICE HRM-2214F or HRM-2218F
HDMI Selector
1 user manual
1 power adapter DC 9V 600mA
1 remote controller
1 RS-232 1.8M cable (DB-9 Male to Female)
1 RS-232 control software CD
2 rack rails, 8 screws for HRM-2218F only
Any thing missed, please contact with your vendor.
Features
■ HDTV resolution up to 1080p, PC resolution up to
1600x1200 60Hz.
Compliant with the specification of HDMI 1.2.
Support RS-232 control.
Remote controller for operation.
Hot pluggable.
Auto skips over the power-off and unplugged cable
1U rack design for HRM-2218F.
FRONT VIEW
1. Port Selection Switches (Manual type)
Press the switch to access the selected DVD
player/TV receiver.
2. Port LEDs
■ All the red LEDs flash while the power adapter is
well connected.
■ Green LEDs light up while the DVD player/TV
receiver has well connected and starting operation.
■ Red LEDs light up while the DVD player/TV
receiver has successfully been selected.
3. IR Receiver
Take aim at IR receiver with remote controller.
Rear View
1 Power Supply
Plug the DC9V 600mA power adapter.
2. RS232 Port Connector
Plug the RS-232 cable.(Optional)
3. HDMI OUT Port Connector
Plug the monitor cable.
4. HDMI IN Port Connectors
Plug the extension cables from HDMI port of HDMI
output port of device.
-1-
-2-

Summary

Features

Specification

Hardware Requirements

Installation

RS-232 Control Software Installation

Operation

Port Selection

Manually select the desired input source using the physical switch.

IR Remote Control

Operate the HDMI selector remotely using the IR receiver and remote.

RS-232 Control

Control the HDMI selector via RS-232 connection and software.

Technical Specifications

Monoprice HRM-2214F Specifications

General

Switch Type	Managed
Power over Ethernet (PoE)	No
Network Standards	IEEE 802.3, 802.3u, 802.3ab, 802.3z
MAC Address Table Size	8K
Layer	Layer 2
Jumbo Frame Support	Yes
Mounting	Rack-mountable
Ports	24