What to do if I see 'H' on my Monsher Ceramic Hob?
The 'H' displayed on your Monsher Ceramic Hob is a normal high temperature notification. It indicates that the hob's surface is still hot. This notification will disappear automatically once the temperature decreases.
How to fix ER03 error on Monsher Ceramic Hob?
The ER03 error on your Monsher Ceramic Hob typically indicates that the user interface is covered by water or a pot. To resolve this, clean the user interface thoroughly.
Describes the reference and function of each control key on the appliance interface for user interaction.
Guidance on how to operate the touch-sensitive controls effectively and correctly, ensuring proper registration of touches.
Step-by-step instructions on how to start, adjust heat settings, and operate the ceramic hob during cooking.
Important warnings and precautions to observe during the installation of the ceramic hob by qualified personnel.
General| Type | Electric |
|---|---|
| Control Type | Touch |
| Voltage | 220-240 V |
| Surface Material | Ceramic |
| Width | 59 cm |
| Frequency | 50-60 Hz |
To Next Page
