02
PRODUCT DESCRIPTION
SPECIFICATION
The Monster Heavy Duty Swing Gate Opener is an easily set up electromechanical gate
opener that can be operated with included remote control. Max single leaf 300kg and
2500mm.
PRODUCT SPECIFICS
TOOLS & SAFETY EQUIPMENT REQUIRED
1. Power Drill & Drill bits
2. Screwdriver set
3. Electrical Tape/ Heat Shrink Tubing
4. G-Clamp
5. Socket Set
6. Spanner set
7. Soldering Iron
8. Multimeter/ Voltmeter
Motor voltage 24 VDC 60W Input power (AC)
220VAC ± 10%
120VAC ± 10%
Rotational speed 300 RPM Arm’s extending speed 24 mm/s
Arm’s max travel 300mm Continuous running time 5 minutes
Max single-leaf length 2500mm Max single-leaf weight 300 Kg
Environment temp -20°C – +50°C Protection class IP55
Max gate open angle 110° Product gross weight 17 Kg
Note: These tools are not provided.
Power drill & drill
bits (required)
Screwdriver set
(required)
Wire cutter &
stripper (required)
G-clamp (required)
Electrical tape/
heat shrink tubing
(required)
Socket set
(required)
Spanner set
(required)
Soldering iron
(recommended)
Multimeter/
voltmeter
(recommended)
To Next Page
Loading...