What to do if my Monster Power HDP 2400 Power Supply is not receiving power?
- BBrian JohnsonJul 31, 2025
First, ensure the PowerCenter switch is turned on and that the AC power plug is securely plugged into a properly grounded 120-volt wall outlet. In some homes, the wall outlet may be controlled by a wall switch, so try turning on nearby light switches. If the PowerCenter is still not receiving power, it's possible that too many devices are connected, causing an overload. In this case, press the Thermal Circuit Breaker button to reset it, and allow 10 minutes before attempting to reset it again. If the breaker continues to trip, try moving some components to another PowerCenter.