OPERATION | 11
Connect to an External Amplifier using the Line Out Port
• Use the supplied 3.5mm to RCA audio cable to connect to the RCA output at the back of the turntable, and then
connect to the your external amplifier.
Connect to a PC for encoding
• You can digitalise sound from the turntable to the computer.
• Connect the supplied USB cable to the PC port on the turntable and the other end to your computer's USB
port. Insert the supplied Driver CD into the computer's disc and follow the on screen instruction to install the
Audacity software. Alternatively, you can download the software and user manual from www.audacityteam.org/
download/
To Next Page
Loading...