Music
Play/Pause: Press the MFB to play/pause.
Next song: Press and hold the “+” button for 2 seconds.
Previous song: Press and hold the “-” button for 2 seconds.
Call
Answer call: Short press MFB.
Reject call: Press and hold the MFB for about 2 seconds.
End call: Short press MFB.
Voice Control
When the speaker is connected to the phone, double press the multi-function button to enable or disable the voice assistant.
Power Saving Setting
Power saving mode is activated when the speaker is turned on. It will turn off automatically in 15 minutes if it is not connected to any Bluetooth
device.
Reset Paired Device List
Power off the speaker, and press and hold the power button for 10 seconds to reset the speaker to factory default.
Connect Two Speakers in Stereo Mode (same model only)
1. Turn on both speakers and do not connect to any Bluetooth device (such as a mobile phone).
2. Double press the “ ” button on one of the speakers, and you will hear a prompt tone, and the speakers will
be automatically connected.
3. After the two speakers are successfully connected, the white LED indicator on each speaker will light up at the same
time.
To Next Page
Loading...
