Need help?Do you have a question about the Mont Blanc JAC FLEX 2 and is the answer not in the manual?
Lists compatible vehicles including Pontiac Transport, Mercedes Vito, Citroën Evasion, Peugeot 806, Lancia Zeta, and Fiat Ulysse.
Fit locking washers to long socket head cap screws and loosely attach to foot holes with square nuts.
Attach load bar to foot, ensuring square nuts are inside, and fit the end cap.
Align foot holes with roof nuts, adjust distance, and tighten securely with short screws.
Insert and secure the lock hole plug with the snap-in hook into the cover's hole.
Attach the cover to the foot by fitting rectangular holes and pushing into place.
Lock the carrier by turning the key 1½ revolutions clockwise and ensure cover is attached.
Keep instructions, use for intended vehicle, and consult dealer for changes.
Notes on load distribution, weight limits, wind resistance, and driving characteristics.
Advice on cleaning, avoiding car washes, and manufacturer's liability for incorrect installation.
Specifies a maximum load of 75 kg, including the 5 kg weight of the rack itself.
Instructions on securing load to prevent movement and distributing weight evenly.
Advice on checking fittings, paint care, driving behavior changes, and car wash use.
General| Brand | Mont Blanc |
|---|---|
| Model | JAC FLEX 2 |
| Category | Automobile Accessories |
| Language | English |
To Next Page
