Need help?Do you have a question about the Montabert 900 and is the answer not in the manual?
General| Brand | Montabert |
|---|---|
| Model | 900 |
| Category | Power Tool |
| Language | English |
Inspect back head components: helicoils, O-ring seats, snap rings, and surfaces for wear or damage.
Check distributor external diameters for scratches. Replace if significant wear or damage is present.
Inspect piston diameters, striking area, length, and cylinder internal surfaces for wear or damage.
Check front guide for cracks. Inspect cradle plates, cylinder seats, and nut seats for damage.
Replace side rods/nuts after 3rd disassembly. Check seats and threads for wear or damage.
Check rubber parts for wear and disk for cracks. Replace suspension if wear limit is reached.
Inspect housing, shock absorbers, bars, plates, and protection for cracks, wear, or damage.
Instructions for draining, disassembling, cleaning, and reassembling the energy chamber.
Procedure for safely inflating the energy chamber using nitrogen and the specific Montabert tool.
Steps for extracting and replacing the front bushing, including mounting the new bushing.
Steps for replacing the upper bushing, covering extraction and mounting procedures.
Instructions for repairing housing cracks using grinding and multi-pass welding procedures.
Positioning dimensions for standard/soundproof front protection and associated welding procedures.
Procedure for mounting wearing plates, including thread locking and tightening specifications.
To Next Page
