Need help?Do you have a question about the Montarbo AD75 and is the answer not in the manual?
General| EQ per Channel | 3-band |
|---|---|
| Aux Sends | 2 |
| Power Output | 75W |
| Frequency Response | 20Hz - 20kHz |
| Woofer | 8" |
| Tweeter | 1 inch |
| Inputs | XLR, 1/4" Jack |
Details controls and connections for mono input channels, including GAIN, EQ, AUX, and effect sends.
Explains controls and connections for stereo input channels, covering GAIN, EQ, AUX, BAL, and ON/OFF.
Guides on setting up and operating the dual stereo multieffects processor, including controls and connections.
Details connections for external effect send and return sockets, and how to route signals.
Details controls for master outputs, control room monitoring, and headphone output.
Explains power connection and tape recorder input/output connections.
Provides guidance on using the graphic equalizer for sound enhancement and feedback reduction.
Guides on setting up and operating the dual stereo multieffects processor, including program selection.
Provides detailed descriptions of various programs and effects available on the dual stereo multieffects processor.
Provides essential guidelines for cleaning, handling, and general care of the mixing console.
Details the correct procedure for connecting the unit to the mains power supply.
Covers best practices for installation, including cable quality and initial connections.
Explains preliminary settings and gain adjustments for optimizing channel dynamics.
Details sensitivity, impedance, gain range, and equalization for mono and stereo input channels.
Provides specifications for the dual multieffect DSP, including conversion, DSP, bandwidth, THD, and SNR.
Details specifications for external effects, Aux, Control Room, Master outputs, and headphones.
Details output power and protections for the AD75's digital amplifiers.
Illustrates connecting active speaker enclosures to the XD75's L-R master outputs.
Illustrates connecting passive speaker enclosures to the AD75's powered outputs.
Details connecting external auxiliary equipment to the L-R insert sockets on XD75 and AD75.
Shows connecting speakers/amplifiers to AD75 insert sockets for line outputs.
Illustrates connecting active speaker enclosures to the L-R Control Room outputs.
Shows connecting active stage monitors to the Aux output.
Details how to connect external effects processors using send/return sockets.
Illustrates hooking up a stereo tape recorder to the mixer's tape in/out sockets.
Shows a typical connection example for the XD75 mixer with various outputs and inputs.
Illustrates an alternative connection example for the XD75, including subwoofer.
Shows a basic connection example for the AD75 mixer with passive speakers.
Illustrates an advanced connection example for the AD75, including subwoofer.
To Next Page
