Need help?Do you have a question about the Montarbo AD52 and is the answer not in the manual?
General| Type | Analog Mixer |
|---|---|
| Channels | 5 |
| Phantom Power | Yes |
| EQ | 3-band EQ |
| Inputs | XLR |
Diagram showing the front panel controls and connections of the XD13 mixer.
Diagram illustrating the rear panel connections and ports for the XD13 mixer.
Diagram detailing the rear panel connections and ports for the AD52 powered mixer.
Important safety advice regarding electrical hazards, fire prevention, and proper product usage.
Detailed description of gain, EQ, aux, effects, pan, and volume controls for mono channels.
Explanation of MIC and LINE/INSERT connection sockets for mono input channels.
Description of gain, EQ, aux, effects, balance, and volume controls for stereo channels.
Details on MIC and L/R line input sockets for stereo channels, including mono connection.
Controls and connections for managing external effects units, including send, return, and balance.
Description of master volume faders, processor activation, and auxiliary master volume.
Details on outputs like L/R Master, Insert, Aux Out, Tape In/Out, and Phones Out.
Recommendations for protecting the mixer from heat, dust, moisture, and physical damage.
Guidance on connecting the mixer to power, using quality cables, and initial setup.
Steps for connecting speakers, microphones, instruments, and setting initial levels.
How to activate, adjust parameters, and select programs for the built-in stereo effects processor.
Essential tips for mixer upkeep, avoiding damage from environmental factors and improper use.
Guidelines for proper installation, cable usage, and power connection for optimal performance.
Key steps for initial setup, including connecting peripherals and setting basic controls.
Instructions for setting up effects, controlling parameters, and routing signals to outputs and monitors.
Illustrates connecting active speaker enclosures or power amplifiers using XLR outputs.
Shows connecting passive speaker enclosures to AD52 powered outputs via Jack and XLR.
Diagrams for connecting external equipment to insert sockets on XD13 and AD52 mixers.
Illustration of connecting active stage monitors to the Aux output.
Diagram for connecting external effects units via send and return sockets.
Illustration for hooking up a stereo tape recorder using PIN connectors.
Example of connecting XD13 to speaker enclosures, stage monitor, and accessories.
Example of connecting XD13 with different active systems like subwoofers and monitors.
Example of connecting AD52 to speaker enclosures, stage monitor, and accessories.
Example of connecting AD52 with different active systems like subwoofers and monitors.
To Next Page
