Need help?Do you have a question about the Montarbo PALCO PLUS and is the answer not in the manual?
General| Brand | Montarbo |
|---|---|
| Model | PALCO PLUS |
| Category | Speaker System |
| Language | English |
Defines a line array as vertically stacked independent units acting as a single sound source.
Discusses how line arrays handle low frequencies and the use of sub-bass units.
Details the RA16 two-way speaker system, its drivers, cabinet construction, and specifications.
Describes the BUMPER B1 suspension frame for flying and stacking RA16 units.
Details the lighter BUMPER B2, certified for flying fewer RA16 units and stacking.
Describes the RAB1815 cardioid sub-bass unit for extending low frequency response.
Explains the LM24 digital controller for driving power amplifiers and optimizing system response.
Details the PLM6800 powered controller, integrating a digital controller and power amplifiers.
Describes EASE Focus software for acoustical simulation and array aiming calculations.
Outlines safety factors, regulations, and practices for flying acoustic systems.
Emphasizes regular inspection and maintenance of hanging hardware for safety.
Instructs to align speakers and bumper on a horizontal plane, ensuring correct orientation.
Guides on positioning the BUMPER correctly under the rigging point for assembly.
Details connecting speakers using front plate holes and two pins per speaker.
Explains releasing BUMPER front plates, rotating, and securing them.
Guides connecting the first speaker to the BUMPER using specific pins, with a caution.
Details connecting BUMPER rear to speaker rear with specific pins.
Emphasizes verifying pin insertion correctness by checking they cannot be extracted without pressing the button.
Visual guide showing hole correspondence for splay angles from 0° to 9°.
Visual guide showing hole correspondence for splay angles from 10° to 12°.
Guides joining speakers with splay angles, suggesting hoist method if difficult.
Advises attaching cables before flying and checking tilt angle with a clinometer.
Details setup for stage floor arrays, emphasizing inversion and BUMPER placement.
Specifies cable lengths, cross-sections (AWG), and quality for safe and efficient wiring.
Details Neutrik Speakon pin assignments for RA16 and RAB1815 connections.
Illustrates the wiring diagram for a standard PalcoPlus system using LM24 controller.
Shows the wiring diagram for a small PalcoPlus system using LM24 controller.
Displays the wiring for a stereo configuration of RA16 speakers with LM24 controller.
Illustrates a split RA16 array configuration wiring with LM24 controller for long/near throw.
Shows the wiring diagram for split RAB1815 configuration using LM24 controller.
Details wiring for PalcoPlus system using LM24 controller with inputs A & B.
Illustrates wiring for a small PalcoPlus system with LM24 controller and inputs A & B.
Wiring diagram for standard PalcoPlus system using PLM6800 controller.
Wiring diagram for small PalcoPlus system using PLM6800 controller.
Wiring diagram for stereo RA16 configuration using PLM6800 controller.
Wiring diagram for split RA16 configuration using PLM6800 controller.
Wiring diagram for split RAB1815 configuration using PLM6800 controller.
Outlines required output power (1500W RMS @ 4 ohms) and gain (36 dB) for amplifiers.
Discusses sound quality, reliability, and size/weight as key amplifier selection factors.
Explains why operating amplifiers at 2-ohm loads is not recommended for this system.
Lists advantages of PLM6800, including optimized gain, size, weight, and wiring protection.
Specifies Windows OS versions and .NET Framework version required for EASE Focus.
Details how to start the EASE Focus installation process.
Describes EASE Focus as a tool for predicting array performance and interactive aiming.
Lists EASE Focus features like aiming display, reports, SPL calculation, and language versions.
Provides technical data for the RA16 enclosure: frequency response, power, SPL, dimensions.
Lists technical data for the RAB1815 sub-bass unit: frequency response, power, directivity.
Details the BUMPER B1 material, dimensions, weight, and load capacity.
Provides specifications for BUMPER B2: material, dimensions, weight, and load capacity.
Provides guidance for private households on proper disposal of electrical and electronic equipment.
Offers information for professional users on how to discard used electrical and electronic equipment.
Information regarding safety and compliance certification for system components.
To Next Page
