Montarbo TANK12SA User Manual

active subwoofer
Manuale istruzioni Instruction manual Bedienungsanleitung Manuel d'instructions Manual de instrucciones

Montarbo TANK12SA Specifications

General

Type	Active Subwoofer
Speaker Size	12 inch
Woofer Size	12 inch
Frequency Response	40Hz - 120Hz
Enclosure Material	Plywood
Input Connectors	XLR
Output Connectors	2x XLR
Crossover Frequency	Variable 80 Hz - 120 Hz
Phase Switch	0° / 180°
Power Output	1000 W

Summary

Safety Instructions

General Warnings and Precautions

Covers essential safety warnings and cautions for operating the product.

Package Contents

Introduction

Product Description

Key Component Identification

Identifies and describes the main physical components of the TANK12SA subwoofer.

Control and Connection Panel

Signal Routing and Level Controls

Details the X-OVER, Volume, and Phase controls for signal management.

Input, Output, and Power Connectors

Explains the AC Line In, AC Loop Out, Link, and Input/Output connectors.

Connection Examples

Example A: Single Subwoofer Setup

Connects one TANK12SA with two self-powered loudspeakers.

Example B: Dual Subwoofer Setup

Connects two TANK12SA subwoofers, each driving one loudspeaker.

Example C: Selective Low-Frequency Routing

Uses mixer AUX output for dedicated low-frequency enhancement.

Example D: Parallel Subwoofer Configuration

Shows how to link multiple TANK12SA subwoofers in parallel.

Connecting to the Mixer

Cable and Connector Guidelines

Provides advice on using appropriate cables and connectors for mixer connections.

Mixer Insert Socket Connection

Details connecting to mixer insert sockets for signal output.

Power Cable Wiring and Safety

PowerCon Connector Assembly Procedure

Step-by-step guide for wiring the PowerCon power connector.

Power Cable Replacement and Handling

Instructions for replacing the power cable and safe handling practices.

Product Care and Maintenance

Power Supply Connection

Phase Alignment

Input Sensitivity and Clipping

Understanding and Avoiding Clipping

Explains input sensitivity and the phenomenon of signal clipping.

Technical Specifications

Connector Types and Layout

Balanced XLR Connectors

Details the layout and types of balanced XLR connectors.

PowerCon Input/Output Connectors

Describes the PowerCon connectors for power input and loop-out.

Spare Parts

Transport Handles

Part numbers and description for transport handles.

Woofer and Protection Grid

Part numbers for the 12" woofer and steel protection grid.

Stand Adaptor and Panel Components

Part numbers for stand adaptor and control panel assembly.