EasyManua.ls Logo

Monte Carlo Fan Company ESSWC-7-WH User Manual

Monte Carlo Fan Company ESSWC-7-WH
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SAFETY INFORMATION AND GENERAL GUIDE
READ AND SAVE THESE INSTRUCTIONS
• Please read and understand this entire manual before attempting to assemble, install or operate
the product.
• Make sure that all electrical connections comply with local codes, ordinances, the National
Electrical Code and ANSI/NFPA 70-1999. Hire a qualified electrician or consult a do-it-yourself
wiring handbook if you are unfamiliar with installing electrical wiring.
Warning: Before proceeding, be sure to shut off electricity at main switch or circuit breaker in
order to avoid electrical shock.
ESSWC-7-WH WALL TRANSMITTER
INSTALLATION AND OPERATION INSTRUCTION
Note
: Fan installation must be complete including assembly of blades before testing wall control
unit.
Note: Refer to your Ceiling fan instruction manual for Safety and installation instruction.
This wall controller is to be used for the control of ceiling fan and fan light only, and in an
AC 120V 60HZ power supply only.
Warning: Do not exceed maximum rating of the wall transmitter. Install the wall transmitter
away from excess heat or humidity
Customer Service
800-969-3347
Customer Service Center
7400 Linder Ave.
Skokie, IL 60077
www.montecarlofans.com
Question and Answer IconNeed help?

Do you have a question about the Monte Carlo Fan Company ESSWC-7-WH and is the answer not in the manual?

Monte Carlo Fan Company ESSWC-7-WH Specifications

General IconGeneral
BrandMonte Carlo Fan Company
ModelESSWC-7-WH
CategoryTransmitter
ColorWhite
Power SourceBattery
CompatibilitySelect Monte Carlo ceiling fans
Control MethodRemote
Control TypeWall control
FeaturesFan speed control, light dimming

Summary

SAFETY INFORMATION AND GENERAL GUIDE

General Safety Precautions

Key safety warnings and general guidance for installation and operation.

Wall Transmitter Installation, Wiring and Setting

Installation and Wiring Procedure

Step-by-step guide for wiring and physically installing the wall transmitter.

Universal and Learning Mode Configuration

Instructions for setting up the transmitter in Universal or Learning Mode for fan control.

WALL TRANSMITTER OPERATION

Control Buttons and Functions

Explains the function of each button on the wall transmitter for fan and light control.

End User Tips and Troubleshooting

Provides helpful tips and common troubleshooting advice for end users of the wall transmitter.