Need help?Do you have a question about the Montech AIR 100 Series and is the answer not in the manual?
Short press the reset button to change RGB mode. Press LED for three seconds to turn off light.
Motherboard sync requires 5V 3-pin; not compatible with 4-pin RGB or standard RGB +12V.
General| Type | Mid Tower |
|---|---|
| Expansion Slots | 7 |
| Maximum CPU Cooler Height | 160mm |
| Maximum PSU Length | 160mm |
| Color | Black, White |
| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
| Material | Steel, Tempered Glass |
| Drive Bays | 2 x 2.5" |
| I/O Ports | 2 x USB 3.0 |
| Maximum GPU Length | 330mm |
| Radiator Support | 120mm |
| Cooling Support | Front: 3 x 120mm or 2 x 140mm, Top: 2 x 120mm or 2 x 140mm, Rear: 1 x 120mm |
To Next Page
