Need help?Do you have a question about the Montech Air 900 Series and is the answer not in the manual?
General| Type | Mid Tower |
|---|---|
| Material | Steel, Plastic, Tempered Glass |
| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
| Expansion Slots | 7 |
| Power Supply Support | ATX |
| Color | Black, White |
| Drive Bays | 2 x 2.5" |
| Cooling Support | Rear: 1 x 120mm |
| Front I/O Ports | 2 x USB 3.0, 1 x USB 2.0 |
| Included Fans | 1 x 120mm (Rear) |
| Dust Filters | Top, Bottom |
| Radiator Support | Rear: 120mm |
Details the motherboard form factors compatible with the case.
Lists the types and number of storage drives the case can accommodate.
Specifies the supported fan sizes and radiator mounting options.
Provides maximum dimensions for CPU cooler and GPU installation.
Includes standoffs and screws for securing the motherboard.
Provides screws for fans and ties for organizing cables.
Contains screws for installing SSDs and HDDs.
Allows control of RGB lighting via the front panel LED button.
Enables synchronization of RGB lighting with compatible motherboards.
Diagrams illustrating fan and radiator placement possibilities.
Instructions on safely removing the tempered glass side panel.
Details the protective film applied to the glass for safety.
Steps for detaching the front panel of the computer case.
Identifies the magnetic dust filters on the front, top, and bottom.
Illustrates how to mount Solid State Drives inside the case or on brackets.
Shows how to install the hard drive cage and position the power supply unit.
Specifies the maximum length for graphics card installation.
Indicates the maximum height for CPU air coolers.
Illustrates the mounting points for Mini-ITX motherboards.
Illustrates the mounting points for Micro-ATX motherboards.
Illustrates the mounting points for ATX motherboards.
Illustrates the mounting points for E-ATX motherboards.
To Next Page
