EasyManua.ls Logo

Montesa 4Ride 2017 User Manual

Montesa 4Ride 2017
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Set-up instructions 2017
Question and Answer IconNeed help?

Do you have a question about the Montesa 4Ride 2017 and is the answer not in the manual?

Montesa 4Ride 2017 Specifications

General IconGeneral
Engine TypeSingle-cylinder, 4-stroke
Cooling SystemLiquid-cooled
Fuel SystemPGM-FI electronic fuel injection
Transmission5-speed
Front SuspensionTelescopic fork
Front Brake Details185 mm disc
StarterKick
Final DriveChain
Front Tire2.75-21
Rear Tire4.00-18
Rear SuspensionPro-Link
Front BrakeDisc
Rear BrakeDisc
Fuel Capacity4.4 liters
Bore x Stroke78 mm x 54.2 mm
Front Suspension Details39mm fork diameter
Dry Weight85 kg (187.4 lbs)

Summary

Before Starting and Unpacking

General Precautions for Unpacking

Essential safety measures and guidelines for unpacking the motorcycle to prevent damage and ensure user safety.

Post-Unpacking Procedures

Instructions for proper disposal of packaging materials after the motorcycle has been unpacked.

Unpacking the Motorcycle

Opening the Box and Removing Straps

Steps for opening the shipping box, cutting straps, and removing staples from the top cover.

Lifting the Motorcycle from the Wooden Base

Instructions for removing staples from the lower sides and lifting the cardboard box from the wooden base.

Initial Component Removal and Handlebar Preparation

Removing Silica Gel Bags and Tie-Wraps

Removing silica gel bags from wheels and sides, and handlebar locking tie-wraps.

Handlebar and Front Brake Pump Assembly

Assembling handlebars, cutting adhesive tape, removing protective plastic, and detaching the front brake pump.

Motorcycle Assembly Steps

Handlebar and Footstep Assembly

Fixing handlebars, attaching the front brake pump, and removing protective pins from footrests.

Removing Protective Wrapping

Removing plastic protective wrapping from the motorbike, odometer, lights, tank, and swingarm.

Final Protective Removal and Base Detachment

Removing plastic from lights, detaching straps, and safely lifting the motorcycle from its wooden base.

Accessory Installation and Cable Connections

Fitting breather pipe, installing mirrors, connecting brake stop switch, and light switch cables.

Handlebar Protector and Disc Cleaning

Attaching handlebar protector and cleaning brake discs.

Pre-Delivery Checklist

Throttle, Tyres, and Electrical Components Check

Checking throttle play, tyre pressure, and electrical component functionality and adjustment.

Lighting, Horn, and Engine Stop Switch Check

Verifying operation of headlights, taillights, turn signals, horn, and engine stop switch.

Fluid Levels and Fastener Security Check

Checking coolant and engine oil levels, and ensuring all nuts and bolts are securely tightened.

Test Run and Leak Inspection

Performing a test run to check operation, handling, brakes, and inspecting for any fuel, oil, or coolant leaks.

Cold Engine Starting Procedure

Starting the Engine

Instructions for starting the engine with the throttle completely closed and allowing it to warm up.

Related product manuals