Montgomery Ward 795734

Questions and Answers

D
David WardAug 6, 2025
How to fix a Montgomery Ward Pressure Washer that won't start?
- D
  Daniel TaylorAug 7, 2025
  If your Montgomery Ward Pressure Washer won't start, there are several potential causes. First, make sure the machine is properly plugged in. If it is, try a different outlet to rule out a defective outlet. Also, check your fuses, reset button, or circuit breaker box, as a blown fuse, tripped GFCI, or tripped circuit could be the issue. Finally, try using the pressure washer without an extension cord, as a defective extension cord can prevent it from starting.
M
Mary SmithAug 14, 2025
What to do if my Montgomery Ward 795734 stops?
- S
  Sharon RichAug 14, 2025
  If your Montgomery Ward Pressure Washer stops, several factors could be responsible. Check the fuses, reset button, or circuit breaker box. Make sure you are using the proper voltage. If the motor is overheated, turn the machine off and let it cool down for 5 minutes. A blocked nozzle can also cause the machine to stop; clean it with a needle or by spraying water backward into the nozzle.
S
srodriguezAug 22, 2025
Why does my Montgomery Ward Pressure Washer have fluctuating pressure?
- A
  Anna AdamsAug 22, 2025
  If your Montgomery Ward Pressure Washer is experiencing fluctuating pressure, it could be due to the pump sucking air. Check that all hoses and connections are tight. Another possible cause is insufficient water pressure. Inspect the hose for any blockages or kinks that may be restricting water flow.
S
Scott HinesAug 30, 2025
Why does my Montgomery Ward 795734 Pressure Washer start and stop by itself?
- C
  Christopher BeltranAug 30, 2025
  If your Montgomery Ward Pressure Washer starts and stops by itself, a likely cause is a leaking spray gun. Check the connection to ensure it is secure. Another possibility is no water supply. Ensure that there are no hose blockages or kinks restricting the water flow.