www.feedingtubeawareness.org Page 3
Loading bag into the pump and starting a feeding
Open DOOR of pump by pushing on the tab above the display screen.
Stretch TEAL TUBING LOOP around the outside of the black WHEEL.
Fit PLASTIC CASSETTE into SLOTS.
Check that tubing is not obstructing the door. Close DOOR.
Make sure feed set adapter is connected to extension set and the extension set is
UNCLAMPED and connected to the feeding tube.
Press and HOLD the ON/OFF button for 3 seconds.
When you see a number (the rate) with ml/hr next to it on the display, press RUN/
PAUSE.
To Next Page
Loading...
