20
CLEANING AND CARE/FAQ
MAINTENANCE AND CLEANING METHODS
Please remove plug from the socket
before cleaning and maintenance .
• Cleaning the body for this device by damp cloth,
then wipe it dry.
• If the machine is too dirty, neutral detergent can
be used for cleaning, but please dilute the
detergent before use.
• Do not clean the unit with the solvent listed on the right which may cause
distortion or discolour.
If the machine cant work properly, please kindly check as below before you
send it out for repair
Problem
Checking rnethods
• Please check if the plug is disconnected from
Do not work
the socket,
• Is there a very strong odor in the using environment?
(Notes air should be purified continuously)
Odor can not be
re moved
• Does the using life time for filters Cometo the end?
• Is the PE bag for filter removed?
High noise
• Does the using life time filter Come to the end?
If the problem is stil
and it for repair
Possible solution
power plug should be plugged properly
It is recommended to ventilate first
and then turn on the machine
Please replace the used filter With a
new one_
Please take out filter and tear Off
Please replace the used filter with a
n EW One.
exsted after above inspections,please disconnect the power
To Next Page
Loading...
