3
Brugermanual
Moonboon slyngevugge
3
User Manual
White Noise Speaker
HOW TO USE THE
WHITE NOISE MACHINE
The white noise machine must be charged for at least two hours before
first use. To charge, reveal the USB output port at the top of the white
noise machine by unfastening the rubber plug. Next, insert the USB
charging cable into the charging plug and connect it to a power outlet
with a voltage of 5V and a current of more than 1A. While charging, the
charging light next to the USB output will light red. The battery is fully
charged when this light turns green.
The battery fully charges in 3 hours. With a fully charged battery, the
white noise machine can play for approximately thirty hours (20 hours
when the light is simultaneously turned on).
The first time you turn the white noise machine on, press , hold for two
seconds, and then press either or to play your first sound.
Charging light
Charging port Reset button Sound
button #1
Sound
button #2
Timer
button
Night light
button
Volume
buttons
On/Off
button
Timing
indicator
Lock/Unlock
switch
To Next Page
Loading...