4
Brugermanual
Moonboon slyngevugge
4
User Manual
White Noise Speaker
BUTTONS AND
FUNCTIONS
ON/OFF BUTTON
Press and hold the button for two seconds to turn the white noise machine
on. The white noise machine will play the sound it played before being
turned off.
Press and hold the ON/OFF button for two seconds again, when you
wish to turn the white noise machine off.
SOUND BUTTON 1 – WOMB SOUNDS
Press once to activate the sounds. Press the button again to cycle through to
the next sound. See the section SOUNDS for a list of the different sounds.
SOUND BUTTON 2 – WHITE, PINK, AND BROWN NOISES
Press once to activate the sounds. Press the button again to cycle through to
the next sound. See the section SOUNDS for a list of the different sounds.
VOLUME BUTTONS: “+” AND “-“
Press the buttons to adjust the volume setting. “+” increases the volume. “-“
decreases the volume. Choose from five sound levels.
TIMER BUTTON
Adjust how long the white noise machine will be playing /will be turned
on. Press to choose between the different timer programs:
• Default: No timer (will play until the battery runs out)
• Press the button once: 60 minutes
• Press the button twice: 120 minutes
A small blue light will light up and indicate the chosen timer setting. No
light indicates that the timer is in Default mode.
NIGHT LIGHT BUTTON
Press and hold the button for two seconds to turn the night light on. Press
and hold the button for two seconds again to turn the night light off.
Please note
Switch between and to lock
and unlock your current settings.
When in the locked position, it is not
possible to change the settings.
Please note
Charge the machine if the light can-
not turn on.
To Next Page
Loading...