Need help?Do you have a question about the MOOSE Z1100E and is the answer not in the manual?
General| Brand | MOOSE |
|---|---|
| Model | Z1100E |
| Category | Security System |
| Language | English |
Explains the status indications of the power light.
Explains the status indications of the armed light.
Describes the system display and its information.
Used to make selections from the display screen.
Used to display additional selection options.
Used to activate emergency alarms.
Used to enter PAC and other data.
Illuminates keys and surrounding area.
Steps to arm the system when leaving or staying.
Steps for arming the system when planning to leave premises.
Steps for arming the system when planning to stay at premises.
Displaying zones not ready to arm.
Steps to fix zones not ready to arm.
How to bypass zones not ready to arm.
How to force arm zones not ready.
Steps to disarm the system.
Actions to take when an alarm occurs.
Explains emergency zones and panic buttons.
How to activate emergency zones.
Steps to silence and reset emergency alarms.
Explains supervisory/trouble zones.
Accesses menus for features.
Displays condition of each zone.
Shows recent alarm history.
Checks interior zone status.
Checks delay zone status.
Checks day monitor status.
Performs system battery test.
Feature for displaying or changing internal memory.
Used by installer for terminal setup.
Used to program main system electronics.
Procedure to change your PAC.
Functionality and programming of temporary codes.
Procedure to change the Master Programming Code.
Steps to delete a code from the system.
Used to adjust the volume of the Security Terminal sounder.
Used to change the date and time.
Indicates system is receiving house current.
Troubleshooting for power light being off.
Indicates weak battery or blown fuse.
Steps to take if a fire alarm sounds.
Resetting smoke detectors and clearing trouble.
List of important emergency contact numbers.
Space to record PAC numbers.
Configuration for Auxiliary emergency zones.
Details on zone types and alarm settings.
Definition of the zone that last alarmed.
Definition of turning the intrusion detection system on.
Definition of removing a zone from the system.
Definition of personal authorization code (PAC).
Definition of the main system electronics.
Definition of zones allowing entry/exit time.
Definition of turning the system off.
Definition of the LCD screen.
Definition of keys to activate emergency alarms.
Definition of time permitted to enter.
Definition of time permitted to exit.
Definition of communication failure with central station.
Definition of overriding to arm with zones not ready.
Definition of zones detecting intruders within premises.
Definition of converting interior zones to delay zones.
Definition of pushbuttons on the Security Terminal.
Generic term for a control station.
Definition of arming when planning to leave.
Code to permit entry into programming mode.
Key to obtain menus of features.
Definition of bypass or force arm.
Definition of exterior door/window contacts.
Sequence to authorize selections.
Definition of setting terminal/panel features.
Ability to service system remotely.
Definition of clearing entries and silencing sounder.
Keys to select features indicated on display.
Definition of arming when planning to stay.
Indicates fault on 24-hour zone.
Definition of permanently active zones.
Definition of a specific detection area.
Establishing a household emergency evacuation plan.
Key points to discuss with family regarding emergencies.
To Next Page
