Need help?Do you have a question about the MOOSE Z700 and is the answer not in the manual?
General| Brand | MOOSE |
|---|---|
| Model | Z700 |
| Category | Security System |
| Language | English |
Explains zone status (ready, armed, faulted) and indicator lights (alarm, trouble).
Steps to arm the system when exiting the premises.
How to arm the system while remaining inside, discussing zone types.
How to disable interior zones and entrance delay before arming.
Explains why the system may not arm and the READY light status.
Procedure to disarm the system when entering the premises via a delay zone.
Actions to take when an alarm occurs, including resetting and identifying zones.
Steps to follow if a false alarm is triggered.
How to manually trigger the emergency alarm using specific keys.
Steps to reset the system after an emergency alarm has been activated.
How to enable audible monitoring of zone openings while disarmed.
How to arm the system with bypassed faulted zones.
Steps to enter the system's programming mode using the Master User Code.
How to add, delete, or change regular and master user codes.
Procedure to modify an existing user code on the system.
Steps to remove a user code from the system.
How to set up a temporary code with a limited number of uses.
Information about remote system servicing capability.
Procedures for bypassing, cancelling, and bypassing all faulted zones.
How to arm and disarm the system using a key switch.
Explains the uses of the '*' key for silencing and exiting test mode.
Step-by-step guide to testing system zones and sensors using audible feedback.
Actions to take when a fire alarm is activated and how to silence it.
How to identify and reset smoke detectors causing trouble conditions.
Steps to create and practice a home emergency evacuation plan.
To Next Page
