11
MG30B/MG51B Dual Zone Wine Chiller Control Panel and Operating Instructions
Control panel and operating instructions:
① Light switch: Press the button to turn on/off the light inside.
② Temperature Unit Switch Button: Press the button to switch the demonstrated temperature unit.
③ Switch to control thermostat display between the upper and lower zone.
④ Lower thermostat display: Solid number shows the actual temperature inside the chiller while the blinking
number shows the set temperature.
⑤ Temperature Unit: Shows the unit of temperature（°C/°F）. Press button ② to switch.
⑥ Upper therm
ostat display: Solid number shows the actual temperature inside the chiller while the blinking
number shows the set temperature.
⑦ Temperature Setting button (Increase): Press the button to increase the temperature inside. The number of
temperature will blink after the first press. Increase one degree(°F/°C) after pressing once each time.
⑧ Temperature Setting button (Decrease): Press the button to decrease the temperature inside. The number of
temperature will bl
ink after the first press. Decrease one degree(° F/°C) after pressing once each time.
⑨ Power Switch: The appliance is default to be on after plugging. Press the switch once to turn off/on the
appliance.
Specifications
(1) Working Environment:At the temperature of 7-38°C(45-100°F) and the humidity should be
45-90%RH.
(2) Temperature range inside the chiller: For MG30B/MG51B, the ins ide temperature is adjustable
from 5-13°C(41-55°F) for the upper zone and 12-18°C(54°-64F) for the l ower zone.
(3) Accuracy of controlling the temperature: +1°C
(4) Working principle: Air cooling and frostless.
Note: The temperature of lower zone should no t be set as 3 degrees higher
than the upper zone in case of failing to reach the expected temperature.
To Next Page
Loading...
