09-05-2003 1 of 11 K6858833
D
F
C
3x
B
A
RB4 NAVIGATION RADIO
CHRYSLER
PT CRUISER . . . . . . . . . . . . .3
300M . . . . . . . . . . . . . . . . . . . .4
CONCORDE . . . . . . . . . . . . . .5
SEBRING . . . . . . . . . . . . . . . .6
TOWN&COUNTRY . . . . . . . . .7
JEEP
LIBERTY . . . . . . . . . . . . . . . .10
GRAND CHEROKEE . . . . . .11
USER’S
MANUAL
DODGE
INTREPID . . . . . . . . . . . . . . . .5
STRATUS . . . . . . . . . . . . . . . .6
CARAVAN . . . . . . . . . . . . . . . .7
DURANGO/DAKOTA . . . . . . .8
RAM . . . . . . . . . . . . . . . . . . . .9
US
• Disconnect and isolate negative battery cable.
• Remove interior trim panels in the order shown.
• Disconnect and remove existing radio. Replace with item C.
• Install GPS antenna as shown to receive an unblocked signal from the satellites.
• Keep GPS antenna cable away from heat sources, sharp edges, or moving parts.
• Do not bend, kink, or tightly coil the GPS antenna cable.
• Apply mercury warning label (Item D) to the B-pillar as shown.
E
To Next Page
Need help?
General
