M2001032C
BOTTOM VIEW OF VERTICAL TANK
For horizontal tanks, install sensor on bottom centerline of tank. Sensor should be level to work properly.
Sensor may be installed anywhere along bottom centerline of tank (as indicated by blue arrows below). Older
tanks may have a buildup of sludge inside the bottom of tank that can affect sensor performance. Relocating
the sensor along the bottom centerline will usually resolve this issue, as there is typically a spot where tank
filling will keep one area clear of sludge.
Move sensor as needed to achieve 2-3 Quality stars, as shown in the app.
PLEASE NOTE: IF YOUR TANK HAS A WELD SEAM DOWN THE BOTTOM CENTER, PLEASE VISIT OUR
WEBSITE OR CONTACT US TO ORDER A WELD SEAM MOUNT BRACKET SO THAT SENSOR CAN BE
PROPERLY INSTALLED.
To Previous Page
Loading...