EasyManua.ls Logo

Mora MRF266N6CWE - Page 9

Mora MRF266N6CWE
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.
1.
4.
Remove the 4 hex head bolts hinges (E)
with an Allen wrench (5/32",4mm).
Remove the lower left and right door
hinges (F).
Pull out the freezer door and the upper
freezer drawer (G) to the final position.
Disassembling the freezer door
Use both hands to open the door more
than 90°. Lift it up and take it off.
F
E
9
G
In case your home access door is too
narrow for the refrigerator to pass
through, remove the refrigerator doors
and drawers. If you do not need to
remove the appliance doors, proceed
to ‘Installing Water Lines’ on page 10.
If you need to remove the doors,
continue below.
Door Removal
Tools you will need(Not provided)
Allen Wrench (5/32",4mm)
Philips Screwdriver
Wrench (5/16",8mm)
With the door closed, remove the 3 screws
holding the top cover (A) with Philips (+)
screwdriver, and then remove the top
cover with the entireharness attached.
Remove the screws (B) fixed on the hinges
with a wrench (5/16",8mm) and 1 ground
screw (C) attached to the hinge with
Philips (+) screwdriver. Remove the upper
left and right door hinges (D).
1.
2.
A
D
C
B

Related product manuals