Mora VDP646X - Installation and Connections

7
Air vent should be near the kitchen floor and minimum75cm²,
opening to the outer atmosphere
2.2. Installation and connections
2.2.1. Preparation of the built-it range prior to installation
Place the mounting
legs as shown in the
figure.
Figure 4
Turn upside down range in
the Styrofoam in the
package and apply the
silicon.
In case of inox products,
apply the silicon on inox
surface, and in case of
glass range products apply
to the glass surface.
Apply the silicon
supplied in the
package around
the range as
shown in the
figure
Mounting legs
connection holes.
Figure 5
Figure 1
Figure 2
Figure 3