Morello Forni PG User Manual

RANGE PG MORELLO FORNI S. A. S.
1
ovens manufacturers in Genoa since 1969
FIRE BRICKS GAS OVENS RANGE “PG” WITH SINGLE GAS BURNER,
THERMOSTATIC DIGITAL CONTROLS
INSTRUCTIONS FOR THE INSTALLATION FOR THE USE
FOR THE MAINTENANCE
Assistance : Contact either your retailer or the builder directly.
The builder claims the right to change in any moment without notice
the content of this Instructions Manual.
Builder:
Ofce:
Phone:
Fax:
e-mail:
Morello Forni S.a.s.
Via B. Parodi 35, 16014 Ceranesi (GE) Italy
++39. 010 7401194
++39.0107492194
info@morelloforni.com
Morello Forni
rev05_17112011
PGPG

Morello Forni PG Specifications

General

Brand	Morello Forni
Model	PG
Category	Oven
Language	English

Summary

Chapter. 1 General Warnings

1.5 General Safety Standards

Lists critical safety regulations and precautions for oven operation.

Chapter. 2 Instructions for the Installer

2.1 Weight and Dimensions

2.2 Receiving the Oven

2.3 Handling and Support Base Assembling

2.5 Oven Positioning

Chapter. 3 Installation

3.1 Wiring and Electrical Hook-up and Power Absorption

Details electrical connection requirements, power supply, and safety precautions.

3.4 Exhaust of Combustion Products

Explains the different methods for connecting the chimney and exhausting combustion gases.

3.5 Technical Data Burner

3.8 Oven Adjustment for Other Types of Gas

3.9 Gas Connection

Covers gas connection requirements, pipe sizing, regulators, and leak testing.

3.11 Feeding Pressure Check

3.12 Check of Gas Leaks

Chapter. 4 Oven's Operating

4.1 Apparatus Safety Devices

Explains the CVI system, safety gas controls, and ignition functions.

4.2 Crown Burner Hi-Low Flame Modulator

4.3 Setting the Oven Dome Temperature

Guides on how to set and adjust the oven dome temperature using the control panel.

4.4 Moduplus: Adjustment, Checkout and Maintenance

Covers adjustments, checks, and annual maintenance for the Moduplus system.

Chapter. 5 User's Instructions

5.1 Oven Operative Instructions

5.2 Safety Gas System and Oven Check

Explains the CVI system, burner lighting, flame detection, and reset procedures.

5.3 Thermal Oven System and Preheating Phase

Details the oven's heating system and the necessary preheating process for new ovens.

5.4 Control Panel Description

Identifies and explains the function of each control on the oven's front panel.

5.5 Oven Running Operations

Outlines the steps for starting and turning off the crown burner safely.

5.6 Oven Cleaning

Chapter. 6 Oven Programming and Control System “INTELTOUCH-MF10”

6.1 Oven Start Up

Explains how to power on the oven and activate the control panel.

6.2 Burner Command Description

6.3 Temperature Selection

6.4 Dome Burner Flame Tuning