8. Trouble Shooting, more:
Start Switch = Button 1 = does not start action:
1. Check cover-sheet is placed correct over sensor in cover station.
2. Check paper in clamp is clamped correct and sensor in clamp-
assy is covered by paper.
A alarm-beep sounds if 1 and 2 happened wrong.
Display shows: ” Error to right”
This happens whilst starting machine and whilst clamp-assy is not
in right hand home position.
= Press Button No 12 for moving clamp assy in home position.
Others
In case any other failure which can be solved or reason found =
Please call your local supplier for help. Explain failure by using this
Operator Instruction Book for identification of items.
Do not touch:
Adjustment-Screw for pneumatic
power for paper-clamp-assy.
In use only for technical service!
For Technical Service only:
To Next Page
Loading...
