7. Air-Compressor
1. Name of parts and function of Air-Compressor
ON-Off-Switch…
…of compressor has to be switched in ON
position before switching on the binding
machine.
After start the compressor should warm up
about 5 minutes for building up the pressure
in air-tank.
Before switching off the binding machine
the compressor must be shut off.
Air-Compresor complete
This compressor uses oil for lubrication.
Once a year the oil should be replaced by new
oil. A spare bottle of oil – 100 ml – is the full refill
and to be found in the accessory-package.
Due to the oil filling of the compressor it is
important that the compressor is moved always in
uptight position!
After transport the compressor should
rest for 1 hour before use!
A extra air-gun is supplied with compressor and
should be assembled as well as the binding
machine. The air-gun is a helpful cleaner for
machine against dust etc.
Air-pressure
…in tank of 9,0 kg/cbm will stop the
motor running for filling the tank
The motor restarts when pressure is
lowered down to app. 6,5 kg/cbm.
To Next Page
Loading...
