Need help?Do you have a question about the Morningstar RM-1 and is the answer not in the manual?
Electrical| self-consumption (backlight off) | 6 mA |
|---|---|
| self-consumption (backlight on) | 15 mA |
| minimum operating voltage | 8 V |
Mechanical| faceplate dimensions | 95.3 x 95.3 mm |
|---|---|
| frame dimensions | 114.3 x 114.3 x 34.54 mm |
| meter weight | 135 g |
Environmental| ambient temperature range | -20 °C to +60 °C |
|---|---|
| storage temperature range | -30 °C to +80 °C |
| humidity | 100% N.C. |
Key safety guidelines for installation and operation of the Remote Meter.
Description of the RM-1's display, icons, buttons, and self-diagnostics.
Instructions and tools required for mounting the RM-1 using the plastic frame.
Instructions for flush mounting the RM-1 into a wall cut-out.
Explanation of how system information is displayed and navigated in rows.
Description of the three buttons used for meter menu navigation.
Explanation of the various icons displayed on the RM-1's digital display.
How to access and adjust settings like temperature units and backlight timing.
Procedure to access and run the RM-1's self-diagnostic test.
How to reset amp-hour and min/max values using button combinations.
Steps for no display, dim display, and no data issues.
Solutions for menu mismatches, window debris, and non-functional buttons.
Steps to follow when requesting warranty service for the RM-1.
Conditions under which the warranty is void and its limitations.
Details on power consumption, dimensions, materials, and weight.
Operating and storage temperature, and humidity ratings.
To Next Page
