Need help?Do you have a question about the Morningstar SureSine 150 and is the answer not in the manual?
General| Model | SureSine 150 |
|---|---|
| Output Power | 150W continuous |
| Output Voltage | 120 VAC |
| Input Voltage | 12 VDC |
| Total Harmonic Distortion (THD) | <3% |
| Efficiency | 90% |
| Surge Capacity | 300W for 5 seconds |
| Output Frequency | 60 Hz |
| Protection | Overload, short circuit, over temperature |
General safety guidelines and NEC compliance for installation and operation.
Safety precautions related to electrical wiring and cable selection for the inverter.
Safety guidelines for physically installing and positioning the inverter.
Critical safety warnings and procedures for battery handling and connection.
Cautions to prevent equipment damage related to battery voltage and charging.
Overview of the SureSine inverter's purpose, features, and capabilities.
Identification of components and physical dimensions for various SureSine models.
Lists necessary tools, hardware, and initial setup steps.
Procedures and safety for mounting, plus DIP switch settings.
Guides for DC, AC, and ground wiring, including torque and protection.
Steps for verifying wiring and safely powering up the inverter.
Explanation of the inverter's status and output LEDs.
How to control AC output using the mode switch.
Connecting via Bluetooth and using the SureSine Utility App.
Connecting via Ethernet (Modbus) and EIA-485.
Using the USB port for firmware updates and device connections.
Connecting to Morningstar networks using MS-CAN.
Step-by-step guide to updating the inverter's firmware.
Technical specifications for the SureSine 150 W and 300 W models.
Technical specifications for the SureSine 700 W and 1000 W models.
Technical specifications for the SureSine 1250 W and 2500 W models.
Tables for maximum wire lengths based on wire type and size.
Steps to follow for warranty service and claims.
Conditions that limit or void the product warranty.
To Next Page
