Need help?Do you have a question about the Morpheus DropTune and is the answer not in the manual?
Power| power supply voltage | 12 VDC |
|---|---|
| power supply current | 0.5 Amp |
Impedance| input impedance | 1 Mohm |
|---|---|
| output impedance | 1 Kohm |
Weight and Dimensions| width | 6.5 in |
|---|---|
| depth | 6.2 in |
| height | 0.8 in |
| weight | 2.2 lbs |
Register the pedal online and connect the power supply unit.
Connect your instrument to the Guitar In jack on the pedal.
Connect the Line Out jack from the pedal to your amplifier's input.
Turn down the amplifier's master volume before connecting.
Controls for stepping pitch down, up, and toggling between settings.
Switch to activate/deactivate the effect and LED indicator for status.
Trim Level knob to adjust input signal strength and LED indicator.
Ensure amplifier master and DropTune trim levels are at minimum.
Turn Trim Level knob until the input LED barely lights yellow.
Increase amplifier volume to desired level and engage the effect.
Use DOWN/UP switches to select pitch drop increments.
Use the EFFECT switch to turn the pitch drop effect on or off.
Instantly switch between dropped pitch and unaffected guitar signal.
Guidelines for safe operation, cleaning, maintenance, and environment.
Information on RoHS, REACH, WEEE, and CE compliance for electronics.
Input/output impedance, power requirements, dimensions, and weight.
Details about the manufacturer, product name, and options.
Confirmation of adherence to EU directives and product specifications.
To Next Page